VIEW 8 Pro—The top of the line core alignment splicer
The View 8 Pro is a premium core alignment splicer that offers maximum working efficiency with many high-tech features, such as fast mode (only 6 seconds splicing time and 9 seconds warm-up time), superior hardware with high-resolution CMOS and an improved industrial multi-core CPU or a motorized fiber core alignment.
And he meets all the requirements of the “ZTV-TK Netz” and is therefore suitable for all work in the Deutsche Telekom network.

A remarkable battery capacity of up to 450 cycles (in power saving mode, 355 cycles otherwise) and adequate water, shock and dust protection round out the View 8 Pro’s performance.
On the high-resolution 5-inch color LCD touch screen with an intuitive and easy-to-use interface, zooming in and out with a simple doubletap— the 520 × magnification is the highest resolution on the market. The integration of vivid instructional videos makes it even easier to get started.
The ergonomically optimized carrying case with shoulder strap contains an exceptionally generous delivery, which includes all the necessary cables, a pair of replacement electrode and even the Cleaver V11, the top model for precise fiber cutting. Other accessories such as strippers or a 12 V adapter for the car socket are available as options.
The View 8 Pro has a built-in IoT module—the slot is designed for nano SIM cards (8.8 × 12.3 mm)—that enables device connectivity to the View Pro Cloud Management system.
5-inch color LCD touch screen
Highest magnification and resolution on the market
High performance battery for up to 450 cycles
Fast mode for maximum efficiency
Integrated video tutorials
Connection to cloud-based solution for remote management
Suitable for working in the Deutsche Telekom network

Product sheet View 8 Pro
Current product sheet “Inno Instrument View 8 Pro fusion splicer”.

Specifications
Model
View 8 Pro
Number of fiber
Single
Splicing process
Core alignment
Applicable fibers
SM (ITU-T G.652 & G.657) / MM (ITU-T G.651) / DS (ITU-T G.653) / NZDS (ITU-T G.655)
Cleaved length
5—16 mm
Cladding diameter
100—125 μm / 200 μm—3 mm
Splicing mode
Maximum 128 modes
Heating mode
Maximum 32 modes
Typical splice loss
SM: 0.01 dB / MM: 0.01 dB / DS: 0.03 dB / NZDS: 0.03 dB / G.657: 0.01 dB
Splicing time
Quick mode: 6 seconds
Heating time
Typical 11 seconds
Heating sleeve length
20—60 mm
Screen
5-inch color display with touch function
Fiber view
X, Y, XY, X/Y
Magnification
520 × magnification
Return loss
› 60 dB
Results storage
The last 10,000 results (Values + photos)
Tention test
1.96—2.25 N
Operating
Button / Touch screen
Lighting
2 white LEDs
Power supply
AC Input 100–240 V, DC Input 19 V
No. of splice & heating with battery
9,000 mAh battery capacity, Typical 200 times (Splice + heat), in power save mode up to 450 times
Electrode life
5,500 arcs, can be extended by using an electrode grinder
Terminal
TYPC / SIM (nano SIM) , UBS-C
Operating condition
Operating altitude: 0–5.000 m above sea level / 0–95 % relative humidity / −10 to 50 °C / Max. wind 15 m/s
Storage condition
0–95 % relative humidity / −40 to 80 °C
Dimensions in mm (Width × Depth × Height)
143 × 158 × 162
Weight
2.78 kg
View Pro Cloud Management System
Another key added value of the View 3 Pro is its integration with the free View Pro Cloud Management System, which offers a whole new level of remote management.
The highlights:
The real-time tracking function shows where the splicer is at any given time—forgetfulness and theft are finally a thing of the past. And pop-up messages provide quick information on the status of the device.
With device management, you can keep an eye on a warning about an electrode or a calibration to be performed, for example, at any times. And software updates can even be imported directly from the cloud.
All reports and data are exchanged online and are therefore immediately available, even if the device remains on a remote construction site. A physical readout via USB is still possible as an option.
Work/task management automatically archives the work progress of each device. Workforce planning has never been easier and efficiency gains are immediate.

All functions are controlled or accessed from the dashboard on the PC connected to the INNO iCloud server. The View 8 Pro in turn communicates with the server via a 4G / 5G cellular network. All it needs is a low-cost IoT SIM card and the splicer is on the web. And all the information is available as quickly as possible and always up to date.
Scope of delivery

Splicer View 8 Pro
Cleaver V11
Fiber holder FH-45
SOC holder SH-SOC-R
SOC heater cover HTS-SOC-02
Power adapter JS-180300
Cooling tray CG-22
Elektrodes E-70
Battery pack LBT-30
Countertop IWS-06
Fastening screw M6 × 8 WTB-01
Power cable ACC-25
USB cable USB-7P
Carrying case ICC-55
Shoulder strap ST-01
Accessories
In addition to the splicer, various tools are required for the correct preparation of the fibers. If you are not yet equipped for this, we are of course happy to help. Whether it’s a suitable stripper, a loose tube cutter for loose tube, cleaning fluid and cloths or a crimping press, we can provide everything. And we’re here to help and advise you. Talk to us or get an initial overview online.
You're looking for a OTDR?
You want to convince yourself of the excellent specifications of the Inno-OTDRs?You need accessories?
If you are looking for high quality accessories to work better ...Your KWS newsletter keeps you cutting-edge with all of our devices, newest software updates and much more: SUBSCRIBE NOW.