Downloads

HE 310

Option DOCSIS 3.1-Analyzer with DOCSIS 3.1 cable modem supported

Upstream-Monitoring-System UMS: Enhancement up to 20 field devices

SNMP-enhancement (MIB-Version V 2.8)

Option DOCSIS 3.1 Downstream (FPGA demodulator) supported

Primary/Secondary detection DOCSIS-Downstream for ScQAM and OFDM

SNMP enhancement (MIB-Version V 2.7)

Datalogger: automatic increment of filename

User-defined channel table supports DOCSIS 3.1-OFDM Downstream D-Channels

Bug Date / Time attachement of created files fixed

Improvements at UNICABLE and JESS

DataLogger measurement type “level only”

Additional D channels in channel table

DVB-S2: Improvements for PLS (Physical Layer Scrambling) and MIS (Multible Input Stream)

Option DRA

Remote access improved with SNMPv3 and FTP

Transport stream data rate measurement at DVB-S / S2 / C / T / T2 / DTMB and ASI input

File names serially numbered at hardcopy to bmp-file

Display of program name at analog TV extracted from videotext header

Improvements at UNICABLE and JESS

SNMP enhancement

Option HEVC und AVS+ is supported

DVB-S2: 16 / 32 APSK extension

DVB-T2: L1 Parameter extended, PLP Selection possible

Constellation diagram with DVB-T2 possible

DAB: Bit Error Rate measurement after Viterbi at DAB+ services

TV: Frequency extended to 1,214 MHz

DTMB: Automatic search function SingleCarrier / MultiCarrier implemented

JESS: Extension to 32 UB slots

Option 1.2 GHz is supported

Additonal Span 867 MHz in TV Analyzer for devices running up to 1,050 / 1,200 MHz

Option DTMB is supported

Display and printout of an LCN list possible

Speed-Test in the DOCSIS-3.0 analyzer possible

Option Optic is supported

Headend mode (depending up on the hardware-stand) = Return path measurement with VAROS 107 is possible as a transmitter

Hum measurement with DVB-C, DOCSIS, PRBS also in percent

Support the DOCSIS 3.0 option

Reception / Evaluation of QAM-PRBS in conjunction with VAROS 107 (upstream generator) activated (depending up on the hardware-stand)

Option DVB-T2 is supported

Hardcopy “LCD” can be attached with Hardcopy “Graphics”

New Unicable standard JESS programming of SAT outlets (hardware dependent)

Automatic tracing of SCR-ADRs in UNICABLE mode

Monitoring program up to one week

Modified handling of channel table with AMA.remote

Four user-defined UNICABLE databases

Tilt measurement in BK spectrum

AFC can be switched off in DVB-S / S2 (resolution 0.1 MHz)

NIT print from ASI is possible

LCN is readable with NIT (depending up on the hardware-stand)

Dynamic PMT can be activated (depending up on the hardware-stand)

The downstream capacity can be documented with DOCSIS (as well as in the data grabber)

Higher flexibility with the EMI measurement

Up to 200 measurements are recordable

Measurementdepth from the Bit error measurement EURO DOCSIS and QAM up to e^-9 possible

Upstream frequency for ranging is selectable

Level measurement in dBmV and dBm

Reception settings for DVB-C and DOCSIS are adjustable

Six user defined headers by print-out

MAX-Hold-Function in all analyzer ranges

Subtitles by DVB (depending up on the hardware-stand)

Warning by software downgrade

Electro magnetic interference measurement possible (optional)

DOCSIS 2.0 analyzer with Ping-Test (optional)

A logo and 3 user-defined lines can be integrated by print out

Channel table B / G: S4 adjusted.

User-defined channel table can be processed and charged with the AMA.remote

Highpass Filter for the S2 / 3 measurement is switchable

Data from the built in Flash Memory can easily be exported on to the USB-Stick

Phase jitter measurement is possible with level information in DVB-C and DOCSIS (but for this function the instrument must come into the factory)

SNMP connection optional is possible

Graphic Measurement Data Recording (DataGrabber)

Automatic input memory function

Print-out of singular Measurements