Basics
Options
Specifications
Downloads
Enquiry

HE 310—Flexible High-End Monitoring-System for the Head-End

The new definition of downstream and return channel measurement …

The headend unit HE 310 is an absolutely individually configurable 19-inch unit (3.5 RU), which combines the functionality of the AMA 310/UMS with that of the classic AMA 310.

On the one hand, the HE 310 can be equipped with return path monitoring measuring modules. In this case, together with the VAROS 107 in the field (and optionally with the RF switch SW 024), a high-end monitoring system for the return channel frequency range can be assembled. All features and measurement options like with the AMA 310/UMS & VAROS 107 are given.

On the other hand, the HE 310 offers all measurement options of a classic downstream measuring device (e. g. DVB-S/-S2, DVB-C, ATV, FM, DVB-T/-T2, optical measurements and many more). All measured values can be read out of the headend via the internet via SNMP.

Downstream and return measurements can be …

combined in almost any way. It is therefore possible, for example, to measure and monitor the DOCSIS return channel, and operate interference suppression and to monitor the headend feed (SAT, terrestrial, FM) with the same measuring equipment and to measure the CATV output signal – all in one device and individually optimized and tailored to your use case.

Any distinction between basic device version, various options and packages (bundle of options) is obsolete. Each HE 310 device is individually compiled and calculated for you. Simply contact us using the enquiry form, we will be pleased to assist you.

KWS-Electronic HE 310 Monitoring System

Basic Features:

  • High resolution bright 5.5″ colour TFT (can be switched off via power-save mode)

  • Frequency range from 5–2,150 MHz
    for return path: 5–65 MHz
    for FM/TV: 45–1,214 MHz
    for SAT: 910–2,150 MHz

  • USB, SCART in/out, ASI in/out, Ethernet (RJ 45)

Possible downstream measurements:

  • Analog: UKW, TV (level measurement and video)

  • S/N measurement module for evaluation of analogue TV signals with SCOPE/HUM indication

  • Digital: DVB-S, DVB-S2, DVB-C, DOCSIS, DVB-T, DVB-T2, DTMB (level/BER/MER/packet error measurement/constellation diagram)

  • MPEG 4 decoder for SD and HD video with 2 × Common-Interface (CI)/NIT evaluation

  • Real time constellation diagram (except DVB-T2, DTMB)

  • Hum and phase jitter detection with CATV signals

  • CATV: MER up to 40 dB, S/N (analog) up to 55 dB

  • Digital analyser for all ranges, tilt measurement, ingress measurement

  • Echo measurement for DVB-T/-T2 and DTMB (Impulse response)

  • Videotext analog/digital, DVB subtitling

  • DiSEqC, UNICABLE, JESS (EN 50494 and 50607)

  • Programming functions for addressable outlets

  • Signal quality monitoring with data grabber

  • Automatic measurements with data logger

  • EMI measurement

  • DOCSIS analyzer (DOCSIS 3.0)

  • SNMP management software

  • FTP functionality for file up and downloads

  • DAB/DAB+ measurement module

  • Optical measurement module

Possible upstream measurements:

  • Frequency range from 5–65 MHz

  • Real-time spectrum analyzer

  • Max-Hold function

  • Frequency sweep (frequency response measurement)

  • Measurement of level, MER, BER and constellation diagram

  • Real-time constellation diagram

  • Modulated test channels up to 256 QAM and 6.4 MHz bandwidth

The HE 310 head-end device is the central monitoring unit. Depending on the application, this can be combined with the cluster switch SW 024 (switching of up to 24 RF upstream signals) and/or with the VAROS 107 as field device for the return path measuring functionality.

Option FTP

FTP stands for “File Transfer Protocol”. Together with SNMP it makes it possible to upload or download files to or from a 310 device. Currently the following new things can be done via FTP over the internet:

  • Upload and download tuning memory files (.mem files)

  • Upload and download user-defined channel tables (.cha files)

  • Download DataLogger result files (.xml files)

  • Download screenshots (.bmp files)

  • Upload firmware updates remotely and initiate the update process (.bin files)

Real »Made in Germany«

Find out why …

Your KWS newsletter keeps you cutting-edge with all of our devices, newest software updates  and much more: SUBSCRIBE NOW.